... Skip to main content

FREE* Gate With Purchase of White Vinyl Privacy Fence [Get Deal]

Find our content useful?

Expert Advice on fence installation, fencing products, maintenance tips and more

DIY

How much fence do I need?

How Much Fence Do I Need? Measure Your Yard in Five Steps

DIY, Fencing How To, Fencing resources, Maintenance-Free | No Comments

Most residential yards take 100 to 260 feet of fence. Walk the line you want to enclose and measure it in feet. That total is your linear footage, and it is the number every quote starts from. At Maintenance-Free Outdoor Solutions we price from that line, not from the lot size. The five jobs documented below ran from 38 feet around a small dog run to 260 feet around a whole yard.

Three things change it once you have it. Gates replace a section of fence and cost more than the fence they replace, so count them separately. Corners each need their own post, so a yard with several turns uses more posts than a straight run of the same length. Slope means the fence is either stepped down in sections or raked to follow the grade, and both use more material than flat ground.

For scale, these are real St. Louis yards and what they actually took. Five jobs we completed and documented. 38 feet for a small dog run in Kirkwood. 100 feet around a patio in Brentwood. 122 feet for pet containment in Eureka. 171 feet around a pool in Barnhart. 260 feet with four gates in St. Louis. Most residential jobs land between 100 and 260 feet.

A shortcut before you measure anything: your plat or property survey already has the boundary dimensions on it. Starting there is faster than a tape measure, and it shows you where the line actually is.

Measure Your Yard in Five Steps

Fifteen minutes with a tape measure and your plat map gets you a number you can order from. Building it yourself? Get your materials from our fence supply store. Rather we handled it? Send us your measurements and we will price the job.

  1. Walk the line and measure it in feet. Start at one corner and follow the boundary you want to enclose. That total is your linear footage, and every quote starts from it. Your plat map already carries these dimensions, so you do not have to pull a tape to find them.
  2. Count your gates. Each gate replaces a section of fence, needs two posts instead of one, and costs more than the fence it replaces. Write that number down separately.
  3. Count your corners. Every turn in the line needs its own post. A yard with five turns uses more posts than a straight run of the same footage.
  4. Note any slope. Ground that falls away means the fence is stepped down in sections or raked to follow the grade. Both use more material than flat ground.
  5. Divide by your panel width. Vinyl and aluminum sections are usually 6 feet. A 150 foot run is 25 sections and 26 posts, one per section plus one to close the run, then two more for every gate.

Read More